All-Round Drone Jamming Detects 50MHz-6GHz Signals and Neutralizes Threats with Passive Detection Anti Drone Uav

• Customization: Available
• Product Name: Drone Detection and Jamming System Integrates Dete
• Operating Frequency Range: 50MHz-6GHz
• Detection Range: 5km
• Feature: Durable
• Positioning Drone Type: Dji, Air, Mini, Fpv, Avata etc
• Detection Radius: ≥5000m
• Number of Targets Can Be Detectedsimully: 160MHz
• Protection Level: IP65
• Weight: Chassis: 28kg Antenna: 3.5kg
• Working Temperature: -30°~60°
• Jammer Range: 3km
• Transport Package: Carton
• Specification: 20X30X10 cm
• Trademark: TTSK
• Origin: Guangdong, China
• Production Capacity: 50000

Product Description

Product overview

TTSK300 Introduction

The TTSK300 drone detection and jamming system integrates detection and jamming, has 360° all-round detection capability, covers an ultra-wide spectrum of 50MHz-6GHz, can autonomously learn to identify unknown drones, handle multiple targets at the same time, is unmanned around the clock, has a whitelist function, adapts to complex electromagnetic environments, and uses omnidirectional countermeasure technology to counter drones in all directions. It is particularly good at identifying frequency-hopping drone signals.
The TTSK300 system is used for drone detection and jamming. The system integrates multiple technologies such as collaborative spectrum sensing and deep neural networks. Through radio detection technology, the system uses the received drone characteristic signals, big data processing, artificial intelligence and machine learning to effectively detect and identify low-altitude drones in the defense area; it uses radio jamming and blocking technology to achieve effective control of intruding drones. The system realizes low-altitude three-dimensional protection within a defense area radius greater than 5,000 meters, and has been widely used in major events and other fields.
 

 

 

Detailed Photos

 

 

 

Product Parameters

1. The best technical route in the industry, detection and interference are integrated, smaller and lighter
2. Passive passive detection, 360° all-round, 50MHz-6GHz ultra-wide spectrum detection range
3. It has the ability to autonomously learn and identify unknown drones, and can record their signal characteristics during drone flight, including industrial drones and consumer drones with standard broadband image transmission and frequency hopping image transmission,
4. It can handle more than 10 targets at the same time, detect, identify and interfere All-day, all-weather, unmanned
5. With whitelist function
6. Unique intelligent gain and reference level patented design to adapt to the needs of complex electromagnetic environment detection
7. Omnidirectional countermeasure, countermeasure drones in all directions
8. Special frequency hopping signal recognition technology, which can identify frequency hopping drones

Detection parameter
Detection range	50MHz~6GHz
Detection Radius	≥5000m(according to environment)
Real-time processing bandwidth	160MHz
Distance measurement accuracy	≤10%R
Horizontal range	0-360°

 

Interference parameters
Interference frequency band 1	(830-930)±5MHz,50W
Interference frequency band 2	(1547-1628)±5MHz,20W
Interference frequency band 3	(2398-2510)±5MHz,100W
Interference frequency band 4	(5702-5887)±5MHz,100W
Interference frequency band 5	433MHz(410-470),50W
Interference frequency band 6	(5128-5381)±5MHz,50W
Interference frequency band 7	(1180-1286)±5MHz,20W
Interference frequency band 8 (Optional)	5.5G(5500-5630)
Defense distance	1000m-3000m (according to environment)
Response time	≤3s

operating system
Whitelist	Yes
Unattended	Yes
Data storage	Yes
Signal recording	Yes
Sound and light alarm function	Yes

Machine parameters
Protection level	IP65
Dimension	Chassis: 410*520*240mm Antenna:800mm
Weight	Chassis: 28KG Antenna: 3.5KG
Maximum power consumption	Detection≤70W;Jammer<1500W
Working temperature	-30°~60°

 

Installation Instructions

A. Connect the network cable to the switch;
B. Connect the device and the operation terminal to the same switch (if the distance between the detection host and the operation computer does not exceed 30 meters, you can also connect the network cable directly to the detection host and the operation computer);
C. Plug in the power supply of the host (note that a three-phase power cable should be used. In addition to the hot wire and the neutral wire, there should be a ground wire, which is well grounded)
D. Set the address of the operation terminal and the outdoor host of the device on the same network segment according to the switch's website address;
E. The network needs to be tested for connectivity. You need to enter ping+device address (default 192.168.2.6) on the operation terminal (default 192.168.2.100). Only if it is connected, it is qualified.
F. After the connection is completed, start the computer and chassis host one by one.
G. The transmission range of the network cable is roughly 30 meters to 50 meters. If it exceeds, a switch relay is required to enhance the network signal.

 

 

Lead Time

Quantity (sets)	1-50	> 50
Lead time (days)	less than 7 days	7-14days

Company Profile

Tatusky Technology Co.,Ltd

With nearly 10 years of experience in drone production and over 7 years of operational experience overseas ,we have successfully delivered over a hundred projects worldwide, based on our reputation and strength in the drone industry, we have established deep and extensive cooperation with anti drone companies and factories from an early age. And since our team has over ten years of accumulation of drone technology and project experience, we can provide products and services that are more in line with drone countermeasures.
 

FAQ

1. How long is the production lead time?
The production lead time varies depending on the product and order quantity. Generally, it takes around 7-15 days after receiving the deposit. Please contact us for more accurate information based on your order.

2. Can I customize the product?
Yes,Power and frequency band can be customized according to your needs
Please contact us with your specific requirements.

3. What is your payment term?
We accept various payment methods, including T/T (Telegraphic Transfer), PayPal, etc.
Payment terms are typically 30% deposit and 70% balance before shipment.

4. How do you ensure product quality?
We have a strict quality control process, including raw material inspection, in-production checks, and final quality inspections before shipment.

5. What shipping methods are available?
We offer multiple shipping options, including sea freight, air freight, and express courier (DHL, FedEx, UPS, etc.). We will recommend the most suitable method based on your order quantity and destination.

6. Can I track my order?
Yes, we will provide you with a tracking number once your order is shipped.
You can use this number to track your order through the carrier's website.

7. Do you provide after-sales service?
Yes, we offer comprehensive after-sales support, including technical assistance and warranty services.
Please contact our customerservice team for any issues related to your order